SM3 Eps 1 Win 7 Crash

wwitthoff1

Hi all, Just started playing the penal zone and after the prologue (when sam and max land in the desoto) the game crashed. Am trying again with xp compat mode active.

EDIT: Well that just game me a game data not found error. Will now try reinstalling.

EDIT: Compy Specs:

<speccydata version="1.00.125" formatversion="1.0">
&#8722;
<mainsection title="Summary">
&#8722;
<section title="Operating System">
<data title="">MS Windows 7 32-bit</data>
</section>
&#8722;
<section title="CPU">
<data title="Mobile AMD Sempron 3500+">189 °F</data>
<data title="Keene 90nm Technology"/>
</section>
&#8722;
<section title="RAM">
<data title="">2.0GB Dual-Channel DDR2 @ 301MHz  5-5-5-15</data>
</section>
&#8722;
<section title="Motherboard">
<data title="">Quanta 30B7 (Socket S1)</data>
</section>
&#8722;
<section title="Graphics">
<data title="Generic PnP Monitor @ 1280x800"/>
<data title="64MB GeForce Go 6150 (HP)">214 °F</data>
</section>
&#8722;
<section title="Hard Drives">
<data title="320GB Western Digital WDC WD32 00BEVT-00ZCT SCSI Disk Device (SCSI)"/>
</section>
&#8722;
<section title="Optical Drives">
<data title="MATSHITA DVD-RAM UJ-850S ATA Device"/>
</section>
&#8722;
<section title="Audio">
<data title="Conexant High Definition Audio"/>
</section>
</mainsection>
&#8722;
<mainsection title="Operating System">
<data title="">MS Windows 7 32-bit</data>
<data title="">Installation Date: 14 April 2010, 21:40</data>
</mainsection>
&#8722;
<mainsection title="CPU">
&#8722;
<section title="Mobile AMD Sempron 3500+">
<data title="Cores">1</data>
<data title="Threads">1</data>
<data title="Name">Mobile AMD Sempron 3500+</data>
<data title="Code Name">Keene</data>
<data title="Package">Socket S1 (638)</data>
<data title="Technology">90nm</data>
<data title="Specification">Mobile AMD Sempron(tm) Processor 3500+</data>
<data title="Family">F</data>
<data title="Extended family">F</data>
<data title="Model">C</data>
<data title="Extended model">4C</data>
<data title="Stepping">2</data>
<data title="Revision">DH-F2</data>
<data title="Instructions">MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64</data>
<data title="Bus speed">200.9 MHz</data>
<data title="Rated Bus speed">803.7 MHz</data>
<data title="Stock core speed">1800 MHz</data>
<data title="Stock bus speed">200 MHz</data>
<data title="Average Temperature">189 °F</data>
&#8722;
<section title="Caches">
<data title="L1 data cache size">64 KBytes</data>
<data title="L1 instructions cache size">64 KBytes</data>
<data title="L2 unified cache size">512 KBytes</data>
</section>
&#8722;
<section title="Core 0">
<data title="Core speed">1808.3 MHz</data>
<data title="Multiplier">x 9.0</data>
<data title="Bus speed">200.9 MHz</data>
<data title="Rated Bus speed">803.7 MHz</data>
<data title="Temperature">189 °F</data>
&#8722;
<section title="Thread 1">
<data title="APIC ID">0</data>
</section>
</section>
</section>
</mainsection>
&#8722;
<mainsection title="RAM">
&#8722;
<section title="Memory">
<data title="Type">DDR2</data>
<data title="Size">2048 MBytes</data>
<data title="Channels #">Dual</data>
<data title="DRAM frequency">301.4 MHz</data>
<data title="CAS# Latency (CL)">5 clocks</data>
<data title="RAS# to CAS# delay (tRCD)">5 clocks</data>
<data title="RAS# precharge (tRP)">5 clocks</data>
<data title="Cycle time (tRAS)">15 clocks</data>
<data title="Bank cycle time (tR&#1057;)">21 clocks</data>
<data title="Command rate (CR)">1T</data>
</section>
&#8722;
<section title="SPD">
<data title="Number of SPD modules">2</data>
&#8722;
<section title="Slot #1">
<data title="Type">DDR2</data>
<data title="Size">1024 MBytes</data>
<data title="Manufacturer">Corsair</data>
<data title="Max bandwidth">PC2-5300 (333 MHz)</data>
<data title="Part number">VS1GSDS667D2      </data>
<data title="SPD Ext.">EPP</data>
&#8722;
<section title="JEDEC #3">
<data title="Frequency">333.3 MHz</data>
<data title="CAS# latency">5.0</data>
<data title="RAS# to CAS#">6</data>
<data title="RAS# Precharge">6</data>
<data title="tRAS">16</data>
<data title="tRC">21</data>
<data title="Voltage">1.800 V</data>
</section>
&#8722;
<section title="JEDEC #2">
<data title="Frequency">266.7 MHz</data>
<data title="CAS# latency">4.0</data>
<data title="RAS# to CAS#">4</data>
<data title="RAS# Precharge">4</data>
<data title="tRAS">12</data>
<data title="tRC">16</data>
<data title="Voltage">1.800 V</data>
</section>
&#8722;
<section title="JEDEC #1">
<data title="Frequency">200.0 MHz</data>
<data title="CAS# latency">3.0</data>
<data title="RAS# to CAS#">3</data>
<data title="RAS# Precharge">3</data>
<data title="tRAS">9</data>
<data title="tRC">12</data>
<data title="Voltage">1.800 V</data>
</section>
</section>
&#8722;
<section title="Slot #2">
<data title="Type">DDR2</data>
<data title="Size">1024 MBytes</data>
<data title="Manufacturer">Corsair</data>
<data title="Max bandwidth">PC2-5300 (333 MHz)</data>
<data title="Part number">VS1GSDS667D2      </data>
<data title="SPD Ext.">EPP</data>
&#8722;
<section title="JEDEC #3">
<data title="Frequency">333.3 MHz</data>
<data title="CAS# latency">5.0</data>
<data title="RAS# to CAS#">6</data>
<data title="RAS# Precharge">6</data>
<data title="tRAS">16</data>
<data title="tRC">21</data>
<data title="Voltage">1.800 V</data>
</section>
&#8722;
<section title="JEDEC #2">
<data title="Frequency">266.7 MHz</data>
<data title="CAS# latency">4.0</data>
<data title="RAS# to CAS#">4</data>
<data title="RAS# Precharge">4</data>
<data title="tRAS">12</data>
<data title="tRC">16</data>
<data title="Voltage">1.800 V</data>
</section>
&#8722;
<section title="JEDEC #1">
<data title="Frequency">200.0 MHz</data>
<data title="CAS# latency">3.0</data>
<data title="RAS# to CAS#">3</data>
<data title="RAS# Precharge">3</data>
<data title="tRAS">9</data>
<data title="tRC">12</data>
<data title="Voltage">1.800 V</data>
</section>
</section>
</section>
</mainsection>
&#8722;
<mainsection title="Motherboard">
<data title="Manufacturer">Quanta</data>
<data title="Model">30B7</data>
<data title="Version">Rev 1</data>
<data title="Chipset vendor">NVIDIA</data>
<data title="Chipset model">GeForce 6150</data>
<data title="Chipset revision">A2</data>
<data title="Southbridge vendor">NVIDIA</data>
<data title="Southbridge model">nForce 410/430 MCP</data>
<data title="Southbridge revision">A3</data>
&#8722;
<section title="BIOS">
<data title="Brand">Hewlett-Packard</data>
<data title="Version">F.42</data>
<data title="Date">03/09/2009</data>
</section>
</mainsection>
&#8722;
<mainsection title="Graphics">
&#8722;
<section title="Monitor">
<data title="Name">Generic PnP Monitor on NVIDIA GeForce Go 6150</data>
<data title="Current Resolution">1280x800 pixels</data>
<data title="Work Resolution">1280x760 pixels</data>
<data title="State">enabled, primary</data>
<data title="Monitor Width">1280</data>
<data title="Monitor Height">800</data>
<data title="Monitor Bpp">32 bits per pixel</data>
<data title="Monitor Frequency">60 Hz</data>
<data title="Device">\\.\DISPLAY1\Monitor0</data>
</section>
&#8722;
<section title="GeForce Go 6150">
<data title="GPU">C51MV</data>
<data title="Device ID">10DE-0244</data>
<data title="Revision">A3</data>
<data title="Subvendor">HP (103C)</data>
<data title="Technology">90 nm</data>
<data title="Release Date">2006</data>
<data title="DirectX Support">9.0c</data>
<data title="DirectX Shader Model">3.0</data>
<data title="OpenGL Support">2.0</data>
<data title="Bus Interface">FPCI</data>
<data title="Temperature">216 °F</data>
<data title="SLI">Disabled</data>
<data title="Driver">nvlddmkm.sys (7.15.11.7713)</data>
<data title="ForceWare version">177.13</data>
<data title="BIOS Version">5.51.28.53.15</data>
<data title="ROPs">2</data>
<data title="Shaders">Vertex 2/Pixel 2</data>
<data title="Memory Type">System</data>
<data title="Physical Memory">64 MB</data>
<data title="Virtual Memory">800 MB</data>
</section>
</mainsection>
&#8722;
<mainsection title="Hard Drives">
&#8722;
<section title="WDC WD32 00BEVT-00ZCT SCSI Disk Device">
<data title="Manufacturer">Western Digital</data>
<data title="Form factor">Unknown</data>
<data title="Business Unit/Brand">Enterprise/WD RE3; WD RE2 (3-platter)</data>
<data title="RPM/Buffer Size or Attribute">10,000 RPM with 16 MB cache</data>
<data title="Interface">SCSI</data>
<data title="Capacity">320GB</data>
<data title="Real size">320,072,933,376 bytes</data>
&#8722;
<section title="S.M.A.R.T">
<data title="S.M.A.R.T not supported"/>
</section>
&#8722;
<section title="Partition 0">
<data title="Partition ID">Disk #0, Partition #0</data>
<data title="Size">100 MB</data>
</section>
&#8722;
<section title="Partition 1">
<data title="Partition ID">Disk #0, Partition #1</data>
<data title="Disk Letter">C:</data>
<data title="File System">NTFS</data>
<data title="Volume Serial Number">A09D8B91</data>
<data title="Size">297.99GB</data>
<data title="Used Space">34.58GB (12%)</data>
<data title="Free Space">263.41GB (88%)</data>
</section>
</section>
</mainsection>
&#8722;
<mainsection title="Optical Drives">
&#8722;
<section title="MATSHITA DVD-RAM UJ-850S ATA Device">
<data title="Media Type">DVD Writer</data>
<data title="Name">MATSHITA DVD-RAM UJ-850S ATA Device</data>
<data title="Availability">Running/Full Power</data>
&#8722;
<data title="Capabilities">
Random Access, Supports Writing, Supports Removable Media
</data>
<data title="Config Manager Error Code">Device is working properly.</data>
<data title="Config Manager User Config">FALSE</data>
<data title="Drive">D:</data>
<data title="Media Loaded">FALSE</data>
<data title="SCSI Bus">0</data>
<data title="SCSI Logical Unit">0</data>
<data title="SCSI Port">0</data>
<data title="SCSI Target Id">0</data>
<data title="Status">OK</data>
</section>
</mainsection>
&#8722;
<mainsection title="Audio">
&#8722;
<section title="Sound Card">
<data title="Conexant High Definition Audio"/>
</section>
&#8722;
<section title="Playback devices">
<data title="Speakers (Conexant High Definition Audio)">(default)</data>
<data title="SPDIF Interface (Conexant High Definition Audio)"/>
</section>
&#8722;
<section title="Recording device">
<data title="Microphone (Conexant High Definition Audio)"/>
</section>
</mainsection>
&#8722;
<mainsection title="Peripherals">
&#8722;
<section title="Standard PS/2 Keyboard">
<data title="Device kind">Keyboard</data>
<data title="Device name">Standard PS/2 Keyboard</data>
</section>
&#8722;
<section title="HID Keyboard Device">
<data title="Device kind">Keyboard</data>
<data title="Device name">HID Keyboard Device</data>
</section>
&#8722;
<section title="HID Keyboard Device">
<data title="Device kind">Keyboard</data>
<data title="Device name">HID Keyboard Device</data>
<data title="Vendor">Logitech</data>
</section>
&#8722;
<section title="HID-compliant mouse">
<data title="Device kind">Mouse</data>
<data title="Device name">HID-compliant mouse</data>
<data title="Vendor">Logitech</data>
</section>
&#8722;
<section title="Synaptics PS/2 Port TouchPad">
<data title="Device kind">Mouse</data>
<data title="Device name">Synaptics PS/2 Port TouchPad</data>
</section>
&#8722;
<section title="HP LJ M1522nf Scan">
<data title="Device kind">Camera/scanner</data>
<data title="Device name">HP LJ M1522nf Scan</data>
</section>
</mainsection>
&#8722;
<mainsection title="Network">
<data title="You are connected to the internet"/>
<data title="Connected through">Broadcom 802.11g Network Adapter</data>
<data title="IP Address">192.168.0.196</data>
<data title="Adapter Type">IEEE 802.11 wireless</data>
&#8722;
<section title="WinInet Info">
<data title="">LAN Connection</data>
&#8722;
<data title="">
Local system uses a local area network to connect to the Internet.
</data>
<data title="">Local system have RAS to connect to the Internet.</data>
</section>
&#8722;
<section title="Wi-fi Info">
<data title="Using native WiFi API version">2</data>
<data title="Available access points count">1</data>
&#8722;
<section title="Wi-fi (gallifrey)">
<data title="SSID">gallifrey</data>
<data title="Name">No name</data>
<data title="Signal Strength/Quality">32</data>
<data title="Security">Enabled</data>
<data title="State">The interface is connected to a network</data>
<data title="Dot11 Type">Infrastructure BSS network</data>
<data title="Network">Connectable</data>
<data title="Network Flags">Currently Connected to this network</data>
<data title="Cipher Algorithm to be used when joining this network">AES-CCMP algorithm</data>
<data title="Default Auth used to join this network for the first time">802.11i RSNA algorithm that uses PSK</data>
</section>
</section>
&#8722;
<section title="WinHTTPInfo">
<data title="WinHTTPSessionProxyType">No proxy</data>
<data title="Session Proxy"/>
<data title="Session Proxy Bypass"/>
<data title="Connect Retries">5</data>
<data title="Connect Timeout">60000</data>
<data title="HTTP Version">HTTP 1.1</data>
<data title="Max Connects Per 1.0 Servers">INFINITE</data>
<data title="Max Connects Per Servers">INFINITE</data>
<data title="Max HTTP automatic redirects">10</data>
<data title="Max HTTP status continue">10</data>
<data title="Send Timeout">30000</data>
<data title="IEProxy Auto Detect">Yes</data>
<data title="IEProxy Auto Config"/>
<data title="IEProxy"/>
<data title="IEProxy Bypass"/>
<data title="Default Proxy Config Access Type">No proxy</data>
<data title="Default Config Proxy"/>
<data title="Default Config Proxy Bypass"/>
</section>
</mainsection>
</speccydata>

EDIT: reinstall did it